It is heart-breaking if the Poco F4 GT you bought with your hard-earned money doesn’t turn on. After going through the various forums, including Mi Community, I found out that there are many complaints about Poco F4 GT not turning on issues wherein your phone simply shows a black screen or is stuck on the MIUI logo or elsewhere. This isn’t a particularly serious problem unless it is because of a hardware issue since software issues can be dealt with easily, not hardware ones. Here’s a troubleshooting guide on fixing the Poco F4 GT not turning on.

The device was launched globally, a rebranded version of the Redmi K50 Gaming Edition handset that was launched in China earlier this year. The smartphone features a 6.67-inch full-HD+ AMOLED display, powered by a Qualcomm Snapdragon 8 Gen 1 SoC, and offers up to 12GB of LPDDR5 RAM.

Also Read

Fix: Xiaomi Poco F4 and F4 GT Black Screen Problem | How to Fix?

Poco F4 GT Device Overview:

The Poco F4 GT features a 6.67 inches AMOLED panel with a 120 Hz refresh rate. It is an FHD+ panel with a resolution of 1080 x 2400 pixels and an aspect ratio of 20:9. We get Gorilla Glass Victus protection at the front of the device. Under the hood, we get the Qualcomm Snapdragon 8 Gen 1 processor built on a 4 nm manufacturing process. It is an octa-core processor with one Cortex X2 core clocked at 3.0 GHz, three Cortex-A710 cores clocked at 2.5 GHz and four Cortex-A510 cores clocked at 1.8 GHz. For handling the graphics-intensive tasks, we have the Adreno 730. The smartphone comes with Android 12 out of the box with MIUI 13 skin running on top of it.

In terms of optics, we get a triple camera setup at the rear and a single selfie camera at the front. The triple rear camera setup consists of a 64MP primary sensor paired with an f/1.9 lens, an 8MP ultrawide sensor paired with an f/2.2 lens, and a 2MP macro sensor paired with an f/2.4 lens. The selfie camera at the front is a 20MP primary sensor paired with an f/2.4 lens. The rear camera system can capture 4K videos at 60 fps, while the front camera is limited to 1080p video recording at 60 fps.

The smartphone comes with two storage options: 128GB internal storage + 8GB RAM and 256GB internal storage + 12GB RAM. We also do not get a MicroSD slot for storage expansion. In terms of communications, we get Wi-Fi 802.11 a/b/g/n/ac/6, Bluetooth 5.2, GPS, NFC, Infrared port, and USB Type-C 2.0. And for sensors, we get a side-mounted fingerprint sensor, accelerometer, gyro, compass, and color spectrum. Powering it all is a 4,700 mAh battery that can be topped up quickly using a 120W power adapter. The company claims that the smartphone can go from 0 to 100 in just 17 mins. The smartphone is available in three color options: Stealth Black, Knight Silver, and Cyber Yellow.

How to Fix If Poco F4 GT Not Turning On / No Power

If your device is not turning on or not showing any sign of life, then don’t worry. You can follow our troubleshooting guide to fix the problem quickly.

Restart the phone

Most of you must’ve done it, but I am putting it anyway for other readers. Since you are getting a black screen or the display is stuck on the MIUI logo and isn’t budging, try pressing the power button for a few seconds. See if that makes any difference.

Do a forced reboot

If pressing the power button doesn’t budge the system from its black screen state, it’s time for a forced reboot. You need a combination of buttons to trigger it. In the case of the Poco F4 GT, it is a volume down plus power button for the Poco F4 GT. You need to press both the buttons simultaneously until the phone vibrates. Check if the phone turns on or not.

Reboot using recovery mode

You can use the recovery mode on your device to turn on the device if it doesn’t work using the reboot or forced reboot method. Here’s how it works.

  • Enter the recovery mode using the power plus volume up buttons pressed simultaneously for 15-20 seconds. Release only when the recovery mode menu appears.
  • Next, press the power button once. This will automatically select “Reboot system now.”

Check for a jammed or broken power button

There’s a chance that the phone is doing fine; however, the power button is either jammed or broken in the power-off position. Pressing a broken power button may not trigger a reboot, and you will have to use ADB tools to fire the system and boot it up. Reach out to a technician to get the power button replaced.

Charge the battery & reboot

This works if the battery has drained after frequently rebooting the device. Plugin the charger and let the device charge for 20-30 minutes. Now, press the power button to see if it turns on.

Remove the battery and insert it

Some smartphone models still use a removable battery (not Poco F4 GT). If you follow this troubleshooting guide for any phone with a removable battery, you can remove it. Wait for a few seconds and insert the battery. Check if the phone turns on now or not.

Do a factory reset

I am talking about torching off all the data stored on your phone, including apps, settings, and others. This will get rid of all the data stored and give you a phone just as you purchased it, ready for setup. Take a backup of the data beforehand. This could work if there was a software-related issue causing the Poco F4 GT not to turn on. If it was a hardware issue, check out the next option mentioned below. Here’s how you can factory restore your Poco F4 GT using Recovery Mode(difficulty level: moderate).

  • Press the Power plus Volume Up buttons together for a few seconds and release the buttons only when the phone vibrates and you see a Mi logo.
  • Use the power button for selection and the volume rocker for going up and down through the options.
  • Select “Wipe data/ factory reset”.
  • Select “Yes — delete all data” and the process will commence
  • You’ll have to set up the device after a reboot.
  • Monitor the performance and check if the display ever goes black or stops the phone from turning on.

Flash the firmware

This is where you will re-flash the firmware onto your device. If at all the Poco F4 GT not turning on was a software issue, this method should work. You’d need an ADB tool that you can download from Google’s developer’s website and the firmware from Google or your OEM for the model you are using. Download the required tools and use ADB on your computer to re-flash the firmware. If you can’t or don’t know how to do it, take your phone to someone who knows how. You could end up in a reboot logo or other issues if the flash isn’t done properly.

The final resort

Considering that no amount of work (if you followed several methods mentioned above before failing) was able to retrieve the device, and it is still unable to turn on, the device likely has a hardware issue. Several components could go wrong and you need a technician to fix the issue either by repairing or replacing the affected component to restore the phone to a perfect working state.

Advertisement

You have options such as either going for a local service center (which is cheaper and speedier) or an authorized service center (which can be expensive but slower) where the former voids the warranty. You can walk into any service center as per your preference and get the phone working if at all it is possible.

Buy a new phone

Of course, there’s an option even after you go through the final resort mentioned above. If the Poco F4 GT not turning on is a serious issue due to faulty hardware, you will need a new phone. If you have recently bought the phone, you can still get a replacement if contacted within 10 days after the purchase. Note that some devices have a replacement period of 7 days so you will have to hurry.

If your phone is 7 or 10-days old and out of the replacement period, check if your phone’s warranty covers the issue or not. You can get a replacement unit if the warranty covers such defects. Another option is to buy a new phone in case there’s nothing you can’t do with the existing phone facing a dire phone not turning on an issue which is often because of fried or defective hardware issues.